Posts Tagged ‘vibration sensor’
An Overview of Vibration Transducers
What are vibration transducers? Vibration transducers used for machinery evaluations are devices that measure displacement of a shaft or motion of a structure and convert this motion into electrical signals. There are three basic types of vibration transducers: Accelerometers Velocity transducers Non-contact Displacement transducers Features of vibration transducers Of these three types of transducers, both…
Read MoreChanging ONEPROD FALCON Settings for Hard-Wire Sensors
From time to time, when performing route-based vibration analysis, you run across situations where access is limited to a data collection point. For example, this large pump below. Climbing up a structure to collect vibration data is unsafe and keeping a ladder stationed nearby can cause headaches as well. A simple solution is to permanently…
Read MorePermanent Mounted Sensors
At the wrap up of a recent Hawk/SMC class the discussion was around what rotating assets to collect vibration data on going forward. The conversation quickly turned to a few keys assets that had the ability to impact large percentages of the downstream processes. The area technicians said that even though the machine was very…
Read MoreVibration Sensor Mounting Tips
A vibration sensor (or accelerometer) measures vibration-simple, right? But how and where you mount the sensor is CRITICAL to getting good information. Here are some good tips to keep in mind. 1. Mount the sensor as close to the bearing location as you can safely do it. These sensors can measure vibration anywhere on the…
Read More