Complete Shaft Alignment System (HA-2)

The Acoem USA store is temporarily closed for maintenance. If you would like to place an order, please contact us directly with your PO at or call us directly at (804) 379-2250 to purchase with a credit card.

Complete Shaft Alignment System (HA-2)


The Complete Shaft Alignment System (HA-2) is the most cost-effective and efficient machinery alignment systems available anywhere.  It takes the once complicated task of shaft alignment and simplifies it by giving accurate and exact recommended movements at the feet of the machine to be aligned. Thus saving countless hours of “trial and error” alignment. You can perform both the “Rim/Face” method as well as the “Reverse Indicator” method with the same hardware. The system accommodates shafts from 1/2″ to 9-1/2″ and includes all the necessary hardware, clamps, chains, etc. all packed in a sturdy aluminum carrying case.



Complete Dial Indicator Shaft Alignment System (HA-2):

  • Rim/Face Method as well as Reverse Indicator Method capability.
  • 12″ maximum span from shaft to coupling hub.

  • Maximum shaft/coupling diameter is 9.5″.

Additional information

Weight 27 lbs


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Complete Shaft Alignment System (HA-2) :

  • (1) Aluminum carrying case
  • (4) 10″ long bracket base chain
  • (1) Protective foam insert for case
  • (1) English/Metric measuring tape
  • (2) Three-way open end wrench
  • (1) Instruction manual
  • (4) Universal mounting bracket base
  • (6) 5/8″ stainless steel jam nut
  • (4) 1″ long extension post
  • (2) 1.5″ long extension post
  • (2) Adjustable rod clamp assembly
  • (2) Adjustable target post
  • (2) 3″ long threaded rod
  • (2) Low profile target
  • (1) Industrial swivel mirror
  • (2) AGD Group 1 Mini Dial Indicator
  • (2) Standard dial indicator clamp
  • (2) 6″ long dial indicator rod
  • (2) 8″ long dial indicator rod
  • (2) 10″ long dial indicator rod
  • (1) 12″ long dial indicator rod
  • (2) 14″ long dial indicator rod


ACCUSHIM, INC. ACCUSHIM, INC. has one of the largest inventories of pre-cut shims in the Nation. We manufacture and distribute the ACCUSHIM line of pre-cut slotted stainless steel shims used for shaft alignment in seven sizes and fifteen thicknesses as well as custom shims to suit your needs.

You've just added this product to the cart: