We design our noise and vibration monitoring instruments on a single ecosystem to facilitate greater inter-connectivity between devices, components and data solution software. With the same integrated keyboard and intuitive web interface, each instrument uses identical data processing software. This improves productivity and makes it simple to operate — with adaptable features and accessories shared across Orion, Fusion, Duo and Cube. This complementary and harmonised system is part of our commitment to ‘do more with less.’
The Cube system is certified IEC 61672 class 1 and is approved in numerous countries. During acoustic monitoring, there may be multiple noise sources to measure, located in varying positions relative to the measurement point (e.g. land transport, aircraft, industrial noise and worksites). Cube can be used to take measurements in two reference directions: 0° or 90°.
Calibration and Verification
To simplify on-site installation, Cube has a function for the automatic detection of a calibration acoustic source which lets you calibrate and adjust the instrument without doing anything more than switching on the device.
An integrated measurement-chain verification system also performs periodic checks automatically. Electrical verification tests the entire measurement chain, including the microphone by injecting an alternating sinusoidal load on the microphone’s terminals at the selected frequencies, at one or two levels. The principle is to read reference values and check the deviation with respect to other measured values over time.
Sophisticated Event-Detection System
Cube incorporates a highly sophisticated event-detection filter system — from the simplest to the most complex configuration. At a basic level, you can define an event and set a trigger that can be programmed over a maximum of 24 time periods. All parameters (overall level, spectral level, sliding Leq, meteorological, etc.) stored at the logging interval instantaneously can be used to define the trigger. With the advanced module, up to five events can be programmed, each featuring a combination of logic statements (“AND” or “OR”) for several triggers.
CUBE offers excellent connectivity, with a built-in 4G modem, WiFi 802.11 b/g/n, Ethernet and ADSL connections. It monitors around the clock, responds to your requests and keeps you informed of situations encountered.
Cube features all the indicators expected by acoustic engineers: Leq, Lp, 1/1 or 1/3 octave spectrum, fast-slow. They can be measured and stored on the basis of an integration period (IP) of 20 ms (min.) to 4600 s (max.) in 5 ms steps.
Weather Station Integration
With Cube, you can interface with the VAISALA WXT546 (six sensors) and WXT542 (two sensors) stations. Acoem chose these two stations because neither features moving parts, averting the risk of mechanical malfunction due to freezing temperatures or wear.
The weather station and Cube share a power supply with a 10-metre cable connecting the two units, giving you increased flexibility when installing the system. Meteorological data is stored on the Cube system and transmitted in the same way as acoustic data (WiFi, 4G modem, USB cable, etc.). The logging interval for meteorological data is a multiple of the acoustic logging interval. Using the remote interface, you can view the wind speed and direction (and additional weather data) in real time.
DMK01 External Unit
The external microphone that comes as standard with your Cube is the DMK01 which features:
- Robust stainless-steel body
- Specific preamplifier & spike let you reuse the microphone supplied with Cube
- Specific anti-wind shield
- A dummy microphone to protect Cube when the microphone is removed.
The unit connects to Cube’s preamplifier input via a cable of 4-50 metres in length. The periodic electrical verification function remains available.