Skip to content
Posts Tagged ‘flatness’
Qualifying the Fixturlaser Level When Using a Fixture
The Fixturlaser level is calibrated to earth level out of the box. If the level is used without a fixture it reads level directly. If a fixture is used, however, you must first qualify the level with the fixture. This is a very simple procedure when using the Fixturlaser NXA. Level measured with no fixture…
Read MoreThe Fixturlaser Level – a digital two axis high precision machinists’ level
The Fixturlaser Level is a high precision two axis digital machinist level. The primary application is base leveling. The Fixturlaser Level offers the following advantages: Two axis live measurement Calibrated to earth level out of the box No line of sight required Immediate feedback with live values Documentation of results Simple to qualify to other…
Read MoreDefining Level vs. Flat
In mechanical trades, most of us have been taught that most installed machines must be installed level and the bases must be flat. But contrary to what many of us think, level and flat are two completely different terms. Level simply means that the machine is parallel to earth, or horizontal. Flat means that the…
Read More