Just like for any plant, it is critical for the data center to sustain minimal to no interruptions to normal processes. The amount of (often sensitive) data housed in the data center servers makes it imperative that data centers continue to run, no matter the conditions. This is why backup generators are so important. In the…
Read More
In this installment of our data center maintenance series, we will discuss fans. While HVAC chillers ensure cool water supplied to fans for cool air is pumped into the servers in a data center, fans ensure that the hot air from the servers is removed efficiently and redirected to the Computer Room Air Conditioning (CRAC)…
Read More
Cooling towers and related components such as chilled water and condenser water pumps are another common type of data center equipment. On a basic level, cooling systems in data centers remove heat from one element and redirect it to another. A cooling tower is the depository for the excess heat given off by data center…
Read More
The emergence of portable computers, the internet, and the ubiquity of portable smart devices has given rise to a new type of industry–the data center. A data center is simply a building used to house computer servers. While these servers may be used for many different types of data storage, their requirements for in-house…
Read More
It’s no secret that there is a shortage of skilled labor in manufacturing, specifically in machinery maintenance. Therefore, those in leadership positions must answer the question “training or no training?”. Another way to look at it is, am I willing to invest in the workforce to better insure a more reliable operation? I wrote a…
Read More
Once unbalance is determined, the original unbalance run (amplitude and phase) is measured, and a trial weight size is determined, the next step is where to place the trial weight. If you have no balancing record for this rotor, where to place the weight is little more than a guess. But there are some things…
Read More
Some things just don’t pass the “eye test”. Your eyes are actually great tools for seeing things that are not straight, not plumb, not level (pictures hanging on a wall for example), not right. Many times, just by looking at a coupling you can tell “it’s not aligned”, and you are usually correct. Visual Inspection:…
Read More
Sometimes machines need to be added to a route that is already established. This is quite easy to do in the Nest. After you have collected all the pertinent information including machine name, RPM and horsepower (at a minimum) go into your Nest home screen and select “set up machine”. Once into machine set up…
Read More
Unbalance (Imbalance) is often defined as the unequal distribution of the weight of a rotor about its rotating centerline. A rotor can be balanced either in-place or in a balancing machine assuming unbalance is the issue and weight can be added or removed. Modern balancing instruments will do the math for you. I originally learned…
Read More
The recent blog on troubleshooting balancing ( https://acoem.us/other-topics/smc-touch-tip-using-the-smc-when-unbalance-is-diagnosed/ ) brought up some additional questions from our readers, so let’s tackle them in order. The first one is setting up to perform a balance job. NECESSARY EQUIPMENT FOR BALANCING If you have gone through the checklist and confirmed unbalance, you will need: A machine to perform…
Read More
The Fixturlaser Smart Machine Checker (SMC) is a great balancing tool (for me personally, it’s the best balancer I’ve ever used). Unbalance is one of the most common machinery problems on rotating equipment, especially fans. If you get a diagnosis of unbalance, be aware of these tips: Be mindful that a rotating mass, once balanced,…
Read More
As you may have noticed if you follow VibrAlign’s social media accounts, we have been going through “Maintenance Tip Mondays” for the past couple months. This is a fun opportunity to hear from our experienced technical trainers as they share the top tips and tricks they have learned over the years in the field and…
Read More
Taking the ONEPROD Falcon to the field is a big part of the 2-day training we provide on our entire Falcon line of condition monitoring tools. When we go to the field we always find interesting issues to analyze and discuss. A recent check of a centrifugal pump yielded one of those issues. The pump…
Read More
We recently published a blog about using the Fixturlaser SMC as a lubrication tool. https://acoem.us/other-topics/using-the-smart-machine-checker-as-a-lubrication-tool/ Ironically, just a couple of weeks later I received some photos from a new SMC customer. He got a report from his SMC stating that a chilled water pump was experiencing motor unbalance. He took the motor apart to inspect…
Read More
Accelerometers by nature are sensitive tools. This sensitivity is heavily influenced by how the sensor is mounted. Standard accelerometers are mounted several ways based on need and application. Typical route-based data collecting will be done with a rare earth magnet. The magnet can be either flat or a two-pole type. This provides good data with…
Read More
If you’re working to maintain machines, Acoem USA wants to help.
We’re committed to providing tools, training, and services that will transform your approach to maintenance and reliability.
