Sometimes machines need to be added to a route that is already established. This is quite easy to do in the Nest. After you have collected all the pertinent information including machine name, RPM and horsepower (at a minimum) go into your Nest home screen and select “set up machine”. Once into machine set up…
Read More
Taking the ONEPROD Falcon to the field is a big part of the 2-day training we provide on our entire Falcon line of condition monitoring tools. When we go to the field we always find interesting issues to analyze and discuss. A recent check of a centrifugal pump yielded one of those issues. The pump…
Read More
A common vibration signature on equipment is looseness. There are two types of looseness: structural/fastener, fit between rotating components. For this discussion, we will focus on structural and fastener looseness. Typically, it is highly directional, occurs at 1xRPM, and will look similar to this spectrum. In this case, the vibration was confined to the vertical…
Read More
Accelerometers by nature are sensitive tools. This sensitivity is heavily influenced by how the sensor is mounted. Standard accelerometers are mounted several ways based on need and application. Typical route-based data collecting will be done with a rare earth magnet. The magnet can be either flat or a two-pole type. This provides good data with…
Read More
We often hear about how to correct unbalance in rotating machinery, but to correct unbalance, it is first necessary to accurately diagnose what type of unbalance your machine is experiencing so that you can take the proper action to correct the problem. In this post, we will go over the three types of unbalance you…
Read More
As the resurgence of manufacturing and processing in America continues, the requirements on all of us to do more with less will only grow more important in order to reach the needed profitability goals. Combine this downward pressure with the diversity of today’s plants and their mechanical components, and the overwhelming gap of skilled workers…
Read More
Determining the RPM (revolutions per minute) of your machine is an important part of conscientious condition monitoring. Significant loss of time and productivity can occur if your machinery is not operating at the correct RPM. That’s why it is imperative to be able to quickly and accurately determine the RPM. In this post we…
Read More
At the wrap up of a recent Hawk/SMC class the discussion was around what rotating assets to collect vibration data on going forward. The conversation quickly turned to a few keys assets that had the ability to impact large percentages of the downstream processes. The area technicians said that even though the machine was very…
Read More
When using the Smart Machine Checker (SMC) or any of Acoem’s Condition Monitoring Tools, there are typically only two variables you need to know for an accurate diagnosis of your machine. You need the horsepower of the motor and the correct rotating speed. This information will usually be stamped on the motor data plate. But…
Read More
It’s no joke that many machines operate with high levels of vibration due to soft foot. These same machines often have a decreased life span due to this condition. Soft foot is a condition that should be eliminated during the precision shaft alignment process, if you’re performing proper alignments at all. This condition can manifest…
Read More
One of the hallmarks of a good maintenance technician is the ability to troubleshoot – not just using vibration tools, or volt meters, or laptops with Ethernet plug-ins, but the ability to troubleshoot machinery in their minds. In other words, the ability to visualize what the problem might be. “Fix the easy things first” is…
Read More
A hype man in rap and hip hop supports the primary rappers with exclamations and interjections, and attempts to increase the audience’s excitement. Emmanuel C. M. says, “the hype man is essential to a live performance. He is an integral piece to the whole show. It’s his job to be the support for the performer, give the performer energy…
Read More
Bearing defect factor is a culmination of two technologies used for shock detection. DEF is designed as an indicator for bearing defect detection, but can also be valuable in the detection of gear defects. Why is DEF significant? In the following data set are displayed Overall Vibration Velocity, Overall Acceleration, and Defect Factor. The Overall…
Read More
A vibration sensor (or accelerometer) measures vibration-simple, right? But how and where you mount the sensor is CRITICAL to getting good information. Here are some good tips to keep in mind. 1. Mount the sensor as close to the bearing location as you can safely do it. These sensors can measure vibration anywhere on the…
Read More
Fire Pumps are a critical safety item in facilities across the world. Their purpose is to make sure a building has enough water pressure in case of a fire emergency. Of course, the hope is that they are never needed but if they are they need to perform reliably. Fire Pumps are typically tested on…
Read More
If you’re working to maintain machines, Acoem USA wants to help.
We’re committed to providing tools, training, and services that will transform your approach to maintenance and reliability.
