5 Machine Tool Measurements You Should Know

If you’ve worked with machine tools before, you’ve likely heard the terms coaxiality, runout, cylindricity, roundness, and total runout, but do you know what each means? In this post we will lay out each of these terms so that you know what each means and so you are able to grasp the difference between them,…

Read More

Compressor Rod Runout with the NXA Runout Probe

The Fixturlaser NXA Runout Probe was introduced last year as an accessory to the Fixturlaser NXA Pro and Ultimate alignment tools.  As originally envisioned, the runout probe was designed with shaft and coupling runout measurements, and direct soft foot measurements in mind. The Runout Probe provides a digital linear displacement measurement, much like a dial…

Read More

What is the Difference between Unbalance and Runout?

Unbalance and runout are two terms that we hear frequently in the predictive maintenance community. Both unbalance and runout can be serious issues and need to be addressed to prevent inefficient functioning and damage to machines. Unbalance occurs due to corrosion, erosion of the fan wheel, or if a correction weight is removed. Runout occurs…

Read More

What is the Fixturlaser NXA Runout Probe?

Acoem USA has introduced the Runout Probe, an accessory device for the NXA Pro.  I (as a jaded, grizzled old millwright-but a good “company man”) was outwardly excited.  But inside, I thought, what’s the big deal?  It’s an electronic dial indicator. That’s what I thought – until I took it for a test drive!  I…

Read More