One of the features of our SMC (Smart Machine Checker) and also of the Falcon is their ability to generate a report of the diagnosis directly from the unit with no PC needed. This can be accomplished by pressing the Diagnosis button on the right side of the screen after collecting all pertinent vibration…
Read More
In our last Balancing How To, we discussed how to set up and get your original measurements on the rotor to be balanced. This How To discusses selecting a proper trial weight. A trial weight is used to make a change in the original vibration amount and direction. Changing either the AMOUNT of vibration (amplitude),…
Read More
The recent blog on troubleshooting balancing ( https://acoem.us/other-topics/smc-touch-tip-using-the-smc-when-unbalance-is-diagnosed/ ) brought up some additional questions from our readers, so let’s tackle them in order. The first one is setting up to perform a balance job. NECESSARY EQUIPMENT FOR BALANCING If you have gone through the checklist and confirmed unbalance, you will need: A machine to perform…
Read More
At the wrap up of a recent Hawk/SMC class the discussion was around what rotating assets to collect vibration data on going forward. The conversation quickly turned to a few keys assets that had the ability to impact large percentages of the downstream processes. The area technicians said that even though the machine was very…
Read More
When using the Smart Machine Checker (SMC) or any of Acoem’s Condition Monitoring Tools, there are typically only two variables you need to know for an accurate diagnosis of your machine. You need the horsepower of the motor and the correct rotating speed. This information will usually be stamped on the motor data plate. But…
Read More
If you’re working to maintain machines, Acoem USA wants to help.
We’re committed to providing tools, training, and services that will transform your approach to maintenance and reliability.
