The new Laser Kit brings a whole new economy and ease of use to laser shaft alignment! This is made possible by replacing the display unit with a free Laser Kit alignment app that runs on the user’s iOS or Android device and communicates live with the laser sensors via Bluetooth. This video from Acoem…
Read More
Acoem introduces the Laser Kit, an affordable laser alignment tool that uses the Laser Kit App installed on the user’s mobile device as the display unit. The App, available for iOS or Android, communicates with the laser transmitter-detectors and performs all the calculations. The App uses the Verti-Zontal alignment method to get alignments done in…
Read More
Acoem introduces the Laser Kit, an affordable laser alignment tool that uses the Laser Kit APP installed on the user’s mobile device as the display unit. The APP, available for iOS or Android, communicates with the laser transmitter-detectors and performs all the calculations. The APP uses the Verti-Zontal alignment method to get alignments done in…
Read More
This touch tip for the Hawk details how to upload your readings from the Hawk to the Nest.
Read More
This touch tip for the Hawk from Acoem shows the steps in sending machine configuration data from the Nest to the Hawk.
Read More
HAWK Touch Tip 01 covered the basics. This Touch Tip shows you how to build a model of the machine you’re going to monitor in the Nest software.
Read More
This touch tip shows users of the HAWK best practices for charging the battery, and where to find login credentials for the NEST cloud-based app.
Read More
Misaligned shafts of rotating machinery are the cause of most machinery failures. This video explains the ways in which misalignment can adversely affect your machinery.
Read More
Despite popular opinion, it is necessary to eliminate angular misalignment of shafts connected by an offset, or cardan, shaft.. This video from Acoem shows how to use the cardan brackets and software to accurately measure and correct the angular misalignment that can cause problems for offset shaft driven machinery.
Read More
The best way to establish how much thermal growth is effecting the alignment of a rotating machine’s shafts is to measure the growth in its offline to running states. This video from Acoem shows how to use the OL2R brackets and software to establish accurate target values for alignment that take into account all the…
Read More
A look back at how Acoem has created a culture of dedication since its founding in 1983.
Read More
Shaft Alignment training from Acoem creates expert aligners. Our 6 trainers have more than 100 years of combined shaft alignment experience! This is the first in a series of 3 short videos about shaft alignment training from Acoem.
Read More
Acoem offers Clean Check Calibrate services for laser shaft alignment tools, as well as the Shaft Hog. The service is performed at Acoem’s laboratory, which has been awarded L-A-B Certification as an IS0 17025:2005 accredited laboratory for calibration.
Read More
Steve Gordon from Acoem presents an example of performing a flatness measurement on an Ariel KBZ 4 compressor using the XA.
Read More
Shaft Alignment training from Acoem creates expert aligners. Our 6 trainers have more than 100 years of combined shaft alignment experience! This is the first in a series of 3 short videos about shaft alignment training from Acoem.
Read More
If you’re working to maintain machines, Acoem USA wants to help.
We’re committed to providing tools, training, and services that will transform your approach to maintenance and reliability.
