Performing Precision Shaft Alignments on Cooling Towers present a unique set of challenges. A recent job is typical of what I find. We were originally called out because on three cooling towers the motors were experiencing high vibration. Some of the challenges include: 1 – Access through shrouds 2 – Ladders often required to gain…
Read More
During a recent cooling tower shaft alignment, using a Fixturlaser XA Alignment System, when we started taking our initial set of measurements the laser beam went slightly off the “S” sensor detector, even in 60 degrees of rotation. Normally when the laser beam travels off the detector I use the laser beam, to perform the…
Read More
If you’re working to maintain machines, Acoem USA wants to help.
We’re committed to providing tools, training, and services that will transform your approach to maintenance and reliability.
