I don’t know about you, but in my nearly 45 years in industrial maintenance, there have been times when I felt stumped when trying to solve a problem. Sometimes you can just walk away and the solution comes to you while performing another task. Other times, a colleague or coworker may come along and have…
Read More
There are numerous items to be considered when performing an initial inspection while setting up vibration analysis routes. All things from safety considerations to machine information, smells, and sounds need to be observed and documented. Safety The first and most important thing to consider when inspecting for a route is safety. Here are some…
Read More
It’s on all of the vibration fault charts, it’s taught in vibration classes, and it’s used for balancing – but how often is phase actually used by vibration analysts to confirm faults? Using phase analysis to prove faults detected during an inspection can really help to verify issues on your machines. Phase, particularly cross-channel phase…
Read More
The Smart Machine Checker (SMC), and the Falcon (vibration data collector/analyzer) use Accurex™ automatic diagnostic software to determine vibration problems on rotating equipment. Accurex™ performs a first order diagnostic based on ISO 10816-3 specifications (based on overall vibration levels in velocity, in inches per second/peak, or mm/sec/rms), and a second order diagnostic based on several…
Read More
What are vibration transducers? Vibration transducers used for machinery evaluations are devices that measure displacement of a shaft or motion of a structure and convert this motion into electrical signals. There are three basic types of vibration transducers: Accelerometers Velocity transducers Non-contact Displacement transducers Features of vibration transducers Of these three types of transducers, both…
Read More
According to the International Organization for Standardization (ISO), unbalance is “that condition which exists in a rotor when the vibratory force or motion is imparted to bearings as a result of centrifugal forces”. In other words, unbalance is an unequal weight distribution of a rotor around its rotating centerline. The rotating centerline or rotational axis…
Read More
Monitoring machinery vibration can use many tools and models, including a hybrid model. Some of the monitoring tools available today include: Portable vibration data collectors and analyzers. Short-term surveillance vibration data collectors and analyzers (which can be installed temporarily). Embedded sensors mounted to equipment which can monitor vibration, temperatures, and other inputs. Permanently mounted accelerometers…
Read More
Balancing rotating machinery is mostly math, with a bit of common sense and experience thrown in. The math is constant, so here are some tips to help with the common sense and experience part. Preparing to balance Inspect before you balance I once balanced a fan by pulling an air filter out of the fan…
Read MoreKnowing the correct rotational speed is critical when performing machinery diagnostics. A strobe light can be an excellent tool for determining speed. Look for a unique mark such as a keyway, piece of tape, etc. to use as a reference. You will adjust the flash rate of the strobe light until you only see one…
Read More
Have you ever added the number of shims your laser alignment tool or dial indicator tells you to during an alignment only to find your machine is still out of alignment? This is a frustrating but common occurrence. Was it a calculation error or did your alignment tool give you the wrong measurement? More than…
Read More
We often hear from clients that machine misalignment is a costly and inconvenient problem. But, just how costly is it? It is far more expensive than most people realize, especially when you take today’s supply chain concerns into account. Between downtime, equipment damages, overtime for repairs, and supply chain interruptions, a fairly minor amount of misalignment…
Read MoreThis grainy photo was from my last day at a Weyerhaeuser mill in 1987. I was a 26 year old millwright. If you look closely, you’ll see an IBM computer in the storeroom. We had another one we used for running Palomar Microlog vibration data collection. We had a first generation laser alignment tool, but…
Read More
Our customers come from a wide range of industries, but they share many of the same pain points in their facilities. Over the years, we’ve consulted our customers to better understand these pain points and how our technology solutions can help to alleviate them. We found the following 4 issues resonated with the majority: Lack…
Read More
Sometimes other data can influence analysis when running your regular routes. This data can range from discharge pressure on pump to slide valve position on a chiller or maybe just bearing temperature just to name a few. With the Falcon and Nest this type of data can be collected and even trended in the Nest.…
Read More
In a recent RT300 class during the field portion of the training, the team made the decision to take vibration readings on a motor/pump assembly that was very noisy and had frequent coupling failures. The RT300 diagnosed misalignment, cavitation and shock modulation. Then using the same RT300, they checked the alignment and it was indeed…
Read More
If you’re working to maintain machines, Acoem USA wants to help.
We’re committed to providing tools, training, and services that will transform your approach to maintenance and reliability.
