Most industrial maintenance mechanics who are involved with precision shaft alignment are familiar with the phenomenon of soft foot. From an alignment standpoint, soft foot causes: Changes in alignment values, between when the hold down bolts are loose, and when they are tight. Non-repeatability in alignment measurements, especially if the bolts are not tightened in…
Read More
One of the hallmarks of a good maintenance technician is the ability to troubleshoot – not just using vibration tools, or volt meters, or laptops with Ethernet plug-ins, but the ability to troubleshoot machinery in their minds. In other words, the ability to visualize what the problem might be. “Fix the easy things first” is…
Read More
A hype man in rap and hip hop supports the primary rappers with exclamations and interjections, and attempts to increase the audience’s excitement. Emmanuel C. M. says, “the hype man is essential to a live performance. He is an integral piece to the whole show. It’s his job to be the support for the performer, give the performer energy…
Read More
Bearing defect factor is a culmination of two technologies used for shock detection. DEF is designed as an indicator for bearing defect detection, but can also be valuable in the detection of gear defects. Why is DEF significant? In the following data set are displayed Overall Vibration Velocity, Overall Acceleration, and Defect Factor. The Overall…
Read More
A customer was experiencing high levels of vibration on one of the HVAC motors. The cause for these high vibration levels was determined to be resonance. Resonance of this motor was seen in the vibration spectral data and was confirmed onsite with a bump test. This motor was not VFD driven and therefore the machine…
Read More
A vibration sensor (or accelerometer) measures vibration-simple, right? But how and where you mount the sensor is CRITICAL to getting good information. Here are some good tips to keep in mind. 1. Mount the sensor as close to the bearing location as you can safely do it. These sensors can measure vibration anywhere on the…
Read MoreOne of the most enjoyable parts of precision shaft alignment training for me as a trainer, is the field portion. This provides the opportunity to build confidence that what the students learn in the classroom, really works in the field! In a recent Fixturlaser GO Basic class, the decision was made to align two recently…
Read More
I read an interesting article in the June/July 17 issue of Uptime Magazine. It was titled “The Reliability Impact Within the P-F Curve” by Randy Riddell. Randy is the Reliability Manager for the SCA Barton Mill in Alabama. I encourage you to read the full article (https://reliabilityweb.com/articles/entry/the-reliability-impact-within-the-p-f-curve). The article includes the following graphic that I…
Read More
Most people who work on, or around pumps are familiar with the term “cavitation”. It is often used as a catch all phrase for any flow-related vibration on pumps, and is often reported by vibration analysts when: Pump noise level is high, Pump vibration is erratic, with lots of “noise” in the spectrum. But there…
Read More
Gearboxes are common in industry. They are used to increase or decrease speed from the driver, provide increased torque, and change direction of power transmission. There are two main types of commonly-used gearboxes: GEARBOX TYPE Parallel or Standard Gearbox-one where the input and output shafts are parallel. Bevel or Right Angle Gearbox-one where…
Read More
LUBRICATION Lubrication is sometimes incorrectly thought of as a job for unskilled workers, apprentices, or operators. When I hear a maintenance person say, “I’m just an oiler”, I cringe a bit. Proper lubrication methods, formulations, quantities, and procedures are essential to machine reliability. A machine can no more do without lubrication than it can do…
Read MoreVibrAlign, Inc., exclusive US distributor of FIXTURLASER brand alignment products, is proud to announce a major expansion to its product offerings; the ONEPROD line of integrated condition monitoring products, developed by VibrAlign’s new parent company, ACOEM S.A. The ONEPROD brand, which includes the HAWK, FALCON, EAGLE, MVX, and NEST, is designed to both fill gaps…
Read MoreDuring the field portion of a recent training class vibration readings were taken before and after the precision shaft alignment of a pump and motor. This was done with a hand held vibration meter with a single plane accelerometer. The readings were approximately as follows: Motor NDE V-.07, H-.07, A-.11. Motor DE V-.07 H-.07 Pump…
Read More
If you’re working to maintain machines, Acoem USA wants to help.
We’re committed to providing tools, training, and services that will transform your approach to maintenance and reliability.
