David Zdrojewski, CEO of Acoem, talks about the Realigning America program. To learn more go to http://www.realigningamerica.com. Realigning America is dedicated to the men and women who are responsible for machinery maintenance, the people who keep America running. No matter what method or tool you are using to perform precision shaft alignments, you’re invited to…
Read More
Laser shaft alignment performed using the GO to align a 200HP motor and a compressor.
Read More
Acoem presents a Touch-Tip showing how to apply the new Verti-Zontal Compound Move laser shaft alignment process developed by Acoem to meet the special requirements of performing a compressor shaft alignment.
Read More
Technicians at Acoem discuss and demonstrate the calibration of the dual lasers of a Shaft Hog laser alignment tool.
Read More
Steve Gordon from Acoem shows a hot shaft alignment being performed on an Ariel JGZ-4 compressor being driven by a CAT 3616.
Read More
Steve Gordon from Acoem shows a precision shaft alignment being performed on a compressor being driven by a CAT 3306 engine
Read More
Acoem shaft alignment Trainer Patrick Lawrence guides us through four Pre-Alignment steps: 1. Rough Alignment 2. Elimination of Obvious Soft Foot 3. Bolt Tightening, and 4. Final Soft Foot Check
Read More
Another satisfied shaft alignment training customer. When Acoem trains shaft alignment onsite we spend the first day in the classroom, then spend another half day in the facility as the students actually apply what they learned performing alignments. The customer picks the machines to be aligned, and they usually pick the toughest challenges. This class,…
Read More
Stan Riddle, Acoem Trainer, shares his opinion as to why a company should consider working with Acoem. Acoem, now in its 30th year of business, sells laser alignment systems including the XA and GO, the Shaft Hog, and the Belt Hog. In addition, Acoem offers expert training in shaft alignment. Acoem has alignment professionals located…
Read More
Stan Riddle, Acoem Trainer, describes the typical outcome for a company that completes Acoem shaft alignment training. Acoem provides training in all methods of alignment, including dial indicators and laser shaft alignment employing any system the customer may be using.
Read More
Stan Riddle, Acoem Trainer, explains how Acoem trains shaft alignment. Acoem provides training in all methods of alignment, including dial indicators and laser shaft alignment employing any system the customer may be using.
Read More
Acoem Trainer Patrick Lawrence guides us through three shaft alignment concepts (Total Indicator Reading, The Validity Rule, and True Position Sensing) with the help of a dial indicator.
Read More
If you’re doing laser shaft alignment the old fashioned way, it’s time to get “Verti-Zontal”, Acoem’s — http://www.acoem.com — revolutionary technique for getting alignments done more efficiently.
Read More
Stan Riddle, Acoem Trainer, talks about the secrets of performing successful laser shaft alignments – managing backlash, eliminating softfoot, tightening the bolts in a repeatable pattern, and trusting the laser alignment tool.
Read More
Stan Riddle, Acoem Trainer, talks about doing real world alignments using the Verti-Zontal compound move laser shaft alignment methodology invented by Acoem. Using Acoem’s laser shaft alignment tools and the Verti-Zontal compound move method alignments can usually be completed with just two turns of the shafts.
Read More
If you’re working to maintain machines, Acoem USA wants to help.
We’re committed to providing tools, training, and services that will transform your approach to maintenance and reliability.
